Power Feeds for Mill Drill Machines

AL-500S	AL-400S	AL-300S	AL-99SP
Speed Range	4-160Rpm, Max. 200Rpm	0-200Rpm, Max.200Rpm	0-140Rpm, Max.200Rpm	0-165Rpm, Max.240Rpm
Voltage	110V 50/60 Hz	110V 50/60 Hz	110V 50/60 Hz	110V 50/60 Hz
Torque	Ave.150, Max 650 in-lb	Ave.150, Max 550 in-lb	Ave.135, Max 440 in-lb	Ave.135, Max 440 in-lb

Model	Torque	Descriptions:	Specials
AL-500SX	150 In-Lb/Max.650	Longitudinal Feed ,X- Axis	420.00
AL-500SY	150 In-Lb/Max.650	Cross Feed, Y-Axis	460.00
AL-500SZ	150 In-Lb/Max.650	Knee Lift Feed ,Z-axis	460.00
AL-400SX	150 In-Lb/Max.550	Longitudinal Feed, X- Axis	395.00
AL-400SY	150 In-Lb/Max.550	Cross Feed, Y-Axis	435.00
AL-400SZ	150 In-Lb/Max.550	Knee Lift Feed Z-axis	435.00
AL-300SX	135 In-Lb/Max.440	Longitudinal Feed X- Axis	340.00
AL-300SY	135 In-Lb/Max.440	Cross Feed Y-Axis	360.00
AL-300SZ	135 In-Lb/Max.440	Knee Lift Feed Z-axis	360.00
AL-99SP	135 In-Lb/Max.440	Drill/ Mill Power Feed X-Axis (For RF-20/30/30B Drill/ Mill Machines)	350.00
SP-250X	150 In-Lb	Longitudinal Feed X- Axis*Replaced with AL-500SX	*Discontinued
SP-250Y	150 In-Lb	Cross Feed Y-Axis*Replaced with AL-500SY	*Discontinued
SP-250Z	150 In-Lb	Knee Lift Feed Z-axis*Replaced with AL-500SZ	*Discontinued
AL-250X	150 In-Lb	Longitudinal Feed X- Axis*Replaced with AL-400SX	*Discontinued
AL-250Y	150 In-Lb	Cross Feed Y-Axis*Replaced with AL-400SY	*Discontinued
AL-250Z	150 In-Lb	Knee Lift Feed Z-axis*Replaced with AL-400SZ	*Discontinued
AL-235X	135 In-Lb	Longitudinal Feed X- Axis*Replaced with AL-300SX	*Discontinued
AL-235Y	135 In-Lb	Cross Feed Y-Axis*Replaced with AL-300SY	*Discontinued
AL-235Z	135 In-Lb	Knee Lift Feed Z-axis*Replaced with AL-300SZ	*Discontinued

Align Power Feed Manual In PDF

Tell a Friend to Visit
Free Tell-a-Friend by Bravenet.com